Extrude the market of Blowing machine This time!

Pre-blowing is too late and the pre-blowing pressure is too low. There are wrinkles in the bottom of the bottle. There is a play in the market of Extrusion blowing machine this time!

Enter the next cycle. Men are still increasing their hobbies, but our company is an air-cooled plastic bottle maker!

The leading enterprise of Flex Commodity Company in the United States, Flex Commodity Company put into production, and Flex Commodity Company independently produced. Today, let’s give you a brief introduction.

The overall solution integration of the packaging production line of the bottle cap factory extends from plastic packaging to packaging sealing, and then provides space for other packaging to enhance performance. On the products we put into production, we will not tolerate their problems beyond expectations. Although they are highly automated, we are still very convenient.

● Material opening. For the opening of high-temperature raw materials, we can not only facilitate production, but also provide solutions for low-temperature physical properties.

● Equipment features: it can be processed by general thermoplastic molding machine without special processing equipment.

In terms of food packaging, we include water; Thermosetting resin. We melt our products into our inner wall through the flame at 30 ° C.

With the increase of packaging price, we are competing with famous brands in summer. For example, Xiangli, roasted flower goods, thoroughly perfumed, coriander, etc., these drinks are indispensable to us.

Clothes hanger: clothes hanger, barrel, can, box, tray. All washing machines and cleaning supplies on the market need our cold storage.

Over the past year, people have higher and higher requirements for juice quality, whether it is familiar with the dairy products around us or the professional service team familiar with our drinking water products.

The best brand is to innovate medical technology, help COVID-19 prevent and control the normal situation, fight against the normal situation of epidemic prevention and control, and improve the reputation of the normal situation.

At present, the domestic injection, drawing and blowing equipment is customized for multi-layer injection of PET preforms as required. The operation interface of the injection and blowing machine has five people. The common industry of each industry is another year.

Before the formal start, several points of preheating should be completed first. This activity will be divided into post-refining start, commissioning, inspection, and then inspection.

● Always form the good habit of checking that the temperature control is in good condition, the heating appliances are in good condition, and pay attention to adjusting the heating temperature at each point in time within the index range; In case of any abnormality, it shall be solved in time.

Blowing machine

● Observe whether the film thickness is uniform, whether the bending diameter meets the standard, and whether the blown film width has deviation; And make appropriate adjustments.

Bottle Manufacturing Machine

● Keep the smooth flow of products and save raw materials together; When melting, mixing and plasticizing materials, attention should be paid to manual cooling and delay, which should not only be conducive to the extrusion of materials, but also have the best wear resistance.

● After the temperature of each temperature control table drops below 135 ° C, stop the operation of the extruder and turn off the upper and lower traction and winding switches. Turn off the power switch and turn off the cooling water and compressed air switch.

● When the machine is running, pay close attention to whether there is abnormal noise in the machine, so as to find it early and stop it in time and solve it early.

● In case of emergency, press the emergency stop button to brake. Then analyze the causes according to the site conditions, find out the problems and solve them quickly.

● After the machine is in normal operation, do not put any part of your body into the machine to prevent the manipulator from hurting people. If the machine has abnormal noise, slow down and observe it.

● After the normal production of the machine, the operator must always observe the quality of the bottle to avoid voltage fluctuation or other reasons affecting the quality of bottle blowing.

● During machine maintenance, press the screen fault maintenance button to ensure safe maintenance. If you need to manually observe the action of each individual mold cavity, please pay attention to the position of the manipulator. At the same time, be sure to understand the function of individual buttons, and then move. Make sure that misoperation causes unnecessary trouble.

Generally, water bottles are beverage bottles (made of PET), and the weight of water bottles is generally called light weight. It is also known as digital bottle, belonging to liquid, and the wheel cap is the part that cannot be tightened, and the standard clamping force can be kept constant. In addition, the necessary torque shall be applied to the reverse direction of the blank opening at any place. If the reverse direction is applied, the gap shall be stable, and the plastic on the piezoelectric plate will scratch the heating/curing.

The company is mainly engaged in filling machine, beverage filling machine, blow filling and sealing machine, bottle blowing machine, rotary bottle blowing machine, and other beverage machinery products.

Jinrong Machinery’s leading products include bottle filling and capping three-in-one unit, filling and capping two-in-one unit, filling and capping two-in-one unit, full-automatic bottle blowing machine, gallon barrel series unit, water treatment production line, automatic on-site cleaning system, various sterilization complete equipment, bottle filling and capping production line, fruit juice and tea beverage complete equipment, etc.

Scroll to Top