Your Professional PET Preform mould Manufacturer in China

  • PET Preform Injection moulding machine
  • 6 – 72 cavity PET Preform mould available
  • Hot runner without tail, free cut
  • Preform weight tolerance within 0.01 grams
Send Your Inquiry

Best Quality Parts For Every PET Preform mould

  • PET Preform Mould Runner
    PET Preform Mould Runner
  • PET Preform Mould Material
    PET Preform Mould Material
  • PET Preform Mold
    PET Preform Mold
  • PET preform moulding materials
    PET preform moulding materials
  • PET Preform Molding
    PET Preform Molding
  • PET Preform Molding Material
    PET Preform Molding Material
  • preform 3
  • preform 4
  • preform
  • Water bottle PET Preform
  • Juice, soft drink PET Preform and PP Preform
  • PET Jar Preform
  • 3-5 Gallon PET Preform

one stop solution for your PET preform production, 1-16 cavity, 24 cavity, 26 cavity, 32 cavity, 48 cavity, 72 cavity with neck finish ROPP, ALASKA,PCO1881, 30/25, 29/25, 26/22, 38mm, 48mm, 50mm.

 

Mold DescriptionPneumatic, pin-valve gate, shut-off, free-cut,  PET preform mold with hot runner.
Cavity quantities6 and 72 cavities
Main mold baseP20 steel (Nitrogen treatment, HRC 28-32 degree)
Core (punch) and cavityS136  (Vacuum quench treatment, HRC 43-52 degree)
Screw neck (lip)S136
Heating plateH13 steel , Chinese standard manifold.
Heating ringROTFIL from Italy.
Temperature controllerPID voltage temperature controller
Preform mold configuration

Adopted European mold

structure;

 

PET materials go into nozzle tip straightly to improve mold cycle

time.

Cooling system on cavity, core. If you require,

we also design the cooling system on neck (slip).

Preforms drop through injection machine central ejector automatically

The controller heat Individual cavities, runner and sprue.

One Temperature zone control one point temperature.

Double-locked, inter-changeable mold components;

Usage life

(guarantee)

2,000,000 shots
Warranty Period2 years

Specifications
1.hot runner with valve gate system;
2.self-lock structure;
3. Spare parts for free;
4. Interchangeable for core, cavity,neck

1.About design
Advanced structure is designed to improve rate of finished products Two-step dual taper locating technology; each cavity self locked independently; off-center adjustment system make the thickness error of perform less then0.05mm. Bottleneck is adopted International Screw thread standard, No cutting of gate is employed to reduce the labor intensity
2. Material of steel
cavity and core with imported 1.2316 stainless steel with fine polishing, high hardness and anticorrosion to get mold’s high precision and good quality.3.About gate
pin-valve gate ,pneumatic drive the nozzle pin simultaneous high speed open and close action. which can effectively control the injection hole open and close actions on each cavity. reliable seal function, smooth moving, low thermal expansion rate ,long using life and also saves electric energy.

4.About hot runner
hot runner system is designed and made by ourselves, it can achieve ideal and prompt heating effect for preform production ,cavity with lower injection pressure to reduce wear and tear of mould parts.

5.heat system
with double heating system,it has separate temperature control mode ,the heat bar are used to heat the mould mainfold plate,small heaters supply the heating temperature for cavity nozzle continuously.

6.cooling system
each parts including core ,cavity and valve gate has independently? cooling system.

7.heat treatment
mechanical treatment cavity and core to prolong service life ,nitrogen treatment with neck screw.with?fitly operation ,guarantee?Long using life over 2.0 million times of injection cycle

8.special satisfied serve
each mould undergoes strict mould test before delivery.we can provide an experienced team for installation and test as per client’s request Standard inter-changeable mould components

Welcome to Visit our PET Preform mouldWorkshop

You are welcome to visit our PET Preform mould workshop, we are in Taizhou, China

Sinco, Your Best PET Preform mould Producer in China

We engaged in manufacture the high quality PET Preform mould for your business in complete price. Our blowing machine designed with high output with working stable, and power saving.

  • Free Spare Parts
  • English Manual book
  • Video Guide
  • Technician Installation in site

Sinco, Your Go-To China Manufacturer of The Best PET Preform moulds

Beside PET bottle blowing machine, Sinco is also specialized in PET Preform mould. As the leading manufacturer of Preform mould, Sinco offer you one stop solution for your PET preform production, not only supply you preform mould, also the injection machine and assistant equipment such as hopper dryer, dehumidifier, water chiller.

The specification of Sinco preform mould: 1-16 cavity, 24 cavity, 26 cavity, 32 cavity, 48 cavity, 72 cavity with neck finish ROPP, ALASKA,PCO1881, 30/25, 29/25, 26/22, 38mm, 48mm, 50-150mm, and also Sinco supply your customized service according to your preform samples or drawing.

The hot runner system is used in Sinco preform mould to reduce the level of AA value , and valve gate employed to make the preform without tail to save your labor, reasonable designed cooling channels to increase cooling effect and shorten your preform production cycling time.

The mold base material is steel P20 with chroming to avoid preform mold corruption. For the preform mould core, cavity, and screw, Sinco use S136 from Sweden, and needle valve from Japan, insulated pad from American, can ensure the hardness and long life of the preform mold more than 2 millions shots.

Sinco preform mould heating system adopts plug type, it is very easy to change the heating bar for mold below 48 cavity, no need to open the mold which will take long time and cause damage to preform mould.

Sinco preform mould install copper plate which is wear-resisting and less noise during preform production. The use of standard PID temperature controller is easy for you to adjust the temperature of each cavity preform.

The tolerance weight of preform form Sinco preform mould can be controlled within 0.1 grams base on the advanced mould design. And Sinco supply you 2-4 sets of die core, die cavity and screw, 3 sets of heating bar as spare parts, which can ensure you 3-5 years use.

Just tell us your preform neck diameter, weight and number of cavity, we can quote you best price of your PET preform mould and preform production line machines.

Contact Our Support Team
Scroll to Top