Your Top Plastic Bottle Making Machine Manufacturer in China

  • Long Service Life & High Safety Level
  • High Speed & Competitive Price
  • Easy Operation & Low Maintenance Cost
  • Siemens PLC with Festo Cylinder
Send Your Inquiry

The Brand Parts Used on Sinco Plastic Bottle Making Machine

  • festo
    Cylinders
  • Schneider
    Electric
  • PLC of bottle blowing machine
    PLC
  • Servo motor of blowing machine
    Servo motor
  • Tranducer of bottle blowing machine
    Inductive switch
  • Valve of blowing machine
    Valves
  • drinking bottle
  • juice bottle
  • Mineral water bottle
  • Mineral water bottle,Pure water bottles
  • Beverage Bottle, Milk Bottle
  • Disinfectant bottle
  • Oil bottle

This kind of plastic bottle making machine is suitable for producing small volume PET bottles with large productivity,the maximum volume of the products is 2000ml,the speed is 2000- 10000 bottles per hour per cavity.

  • Suitable for Bottle Volume: 20ml—2000ml
  • Production Capacity: 2,000-10,000BPH
  • Delivery Time: 30-40 days
  • Payment Term: T/T or L/C
  • SC-F2,SC-F4,SC-F6,SC-F8 Full automatic PET bottle Blowing machine
  • SC-F5L-1,SC-F5L-2,SC-F10-1,SC-F10L-2 Large volume bottle blowing machine

This serious plastic bottle making machine is special for produce big volume PET bottles 3–20 liters with automatic preform loading and servo system, more power saving.It is widely used to produce the Soda bottle ,mineral water bottle, pesticide bottle ,oil bottle ,cosmetics,wide-mouth bottle etc.

  • Suitable for Bottle Volume: 5-10-20 liter
  • Production Capacity: 700-1,500BPH
  • Delivery Time: 30-40 days
  • Payment Term: T/T or L/C

Automatic Wide Neck Plastic Bottle Making Machine is designed for make wide neck jar 50mm —120mm for honey, candy bottles or PET jar.

  • Suitable for Wide Neck Bottle Volume: 100ml–5 liter
  • Production Capacity: 700-1,500BPH
  • Delivery Time: 30-40 days
  • Payment Term: T/T or L/C
  • Automatic Wide Neck PET Bottle Blowing Machine SC-H1C5L, SC-H2C2L
  • Semi automatic PET Bottle Blowing Machine SC-2000, SC-5000-1, SC-5000-2, SC-10L

Semi automatic Plastic Bottle Making Machine is manual operated, workers load preform, take out preform and put into blower by hand, the speed base on the experiences of workers.High Quality with Low Price.

  • Suitable for Bottle Volume: 100ml–5 liter–10 liter
  • Production Capacity: 700-1,500BPH
  • Delivery Time: 20–30 days
  • Payment Term: T/T or L/C

This kind of plastic bottle making machine is designed with 4 cavity for bottle 50ml to 1500ml, its middle speed with reasonable price.Less noise and excellent stability.

  • Suitable Bottle Volume: 50ml–1500ml
  • Production Capacity: 1,500-2,000BPH
  • Delivery Time: 25–30 days
  • Payment Term: T/T or L/C
  • 4 Cavity Semi Automatic Bottle Blowing Machine with Preform Automatic feeding SC-1500-4
  • PET 3-5 Gallon (20L) Semi automatic PET Bottle Blowing Machine SC-5G

This Semi-auto3-5Gallon Bottle Making Machine is suitable for producing PET plastic containers and bottles of 10Liters -20Liters.It equipment with inner heater to heat the preform average to ensure high-quality gallon.

  • Suitable for 3–5 gallon PET bottle, 10-20 liter.
  • Production Capacity: 60-120BPH
  • Delivery Time: 25–30 days
  • Payment Term: T/T or L/C

Welcome to Visit Our Factory

You are always welcome to visit our factory and look forward to discussing more professional knowledge about blow molding machines with you.

Sinco, Your Best Plastic Bottle Making Machine Manufacturer in China

Beside supply blowing machine, sinco also supply preform mold, preform making machine, cap mold and filling machine. Call us now for your next project, you will be satisfy with our machine quality, reasonable price and fully after sales service

  • Free Spare Parts
  • English Manual book
  • Video Guide
  • Technician Installation in site

develop PET blowing machine

Sinco, the professional Plastic Bottle Making Machine for Bottle Manufacturer in China

Sinco is one of the top professional manufacturer of Plastic Bottle Making Machines and your reliable supplier in China. We start to make Plastic Bottle Making Machine from 2000, after 20 years develop, now we have become a machine factory with more than 100 skilled workers and 20 R & D technicians, and we have more than 20 sets of advanced manufacturing equipment such as milling machines, electric discharge machines and machining centers from Germany. All of those facilities will ensure your Plastic Bottle Making Machine complete on time with high quality.

Base on the reasonable structure design, more steel material platform, and advanced hydraulic system adoption, our Plastic Bottle Making Machine work very fast and smoothly, more important it is running stability. Sinco Plastic Bottle Making Machine also called Plastic Bottle Making Machine give you a very competitive price. Our machines can be used for produce your water bottle and PET bottle in a various range, the speed of our machine can be from 2000 to 8000 bottle per hour, if you have special speed demand, we can custom you more productivity machines. And Sinco machinery is designed properly and treat each parts strictly, those can make you produce high quality plastic PET bottles with our machines.

The use of high level servo motor, the small space of preform heating oven, can save more than 30% electricity consumption during you produce your bottles. Sinco machinery is also easy to operate, all the functions you can control on one PLC touch screen. Change molds and spare parts also simple with our special structure. Beside manufacturing your high-quality machines in a reasonable price, Sinco also supply you full support on after sales service. One to two years easy broken parts will be delivery to you with the machines, if need, we can send our technicians to your factory to help you to install machines and mould. Sinco Plastic Bottle Making Machine can be lined with your preform making machine and water filling machine. And our key advantage is to supply the best design of your complete line of beverage production.

Sinco also offers excellent quality control services, 24/7 online support, help with installation and training your personnel, manuals in English and Spanish, and more. We will also keep stock and send you spare parts for your Sinco Plastic Bottle Making Machine

Besides Plastic Bottle Making Machine, Sinco also manufactures PET blow molding machines, extrusion blowing machine, plastic blow moulding machines, water tank making machines, drum making machines, plastic can making machines, and plastic chair making machines.

At Sinco, we value our clients, so our production and services are geared toward helping your business skyrocket. Contact us today to start a great partnership!

 Plastic Bottle Making Machine –FAQs Guide

An Informative and ultimate FAQ guide about Plastic Bottle Making Machine can save you from loss.

The right directions about this machine can help you to take longer life service from it.But if you are looking for an all-in-one FAQ guide about Plastic Bottle Making Machine?Then stop worrying, here is all the necessary information about it.

Let’s start here!

1. What Is A Plastic Bottle Making Machine?
2. What Are The Features Of A Plastic Bottle Making Machine?
3. What Are The Major Components Of A Plastic Bottle Making Machine?
4. How Does A Plastic Bottle Making Machine Works?
5. How Can You Take Advantage Of A Plastic Bottle Making Machine?
6. What Are The Famous Brand Parts Of 4 And 6 Cavity Plastic Bottle Making Machine?
7. What Is The Capacity Range Of Plastic Bottle Making Machine?
8. What Is The Maximum Air Pressure Required For The Bottle Production In Plastic Bottle Making Machine?
9. What Type Of Industries Require is A Plastic Bottle Making Machine?
10.How To Take Care Of Your Plastic Bottle Making Machine?
11.What Are The Types Of Plastic You Can Use In Plastic Bottle Making Machine?
12.Can You Use Plastic Bottle Making Machine For The Production Of Other Plastic Products?
13.Is Your Plastic Bottle Making Machine Is Time Saving?
14.What Is The Real Power Consumption Of A Plastic Bottle Making Machine?
15.What To Consider While Choosing A Plastic Bottle Making Machine?
16.Is The Production Rate Of Plastic Bottle Making Machine Is Higher Than That Of Semi-Automatic Plastic Bottle Making Machine?
17.What Are The Two Installation Options For Your Plastic Bottle Making Machine?
18.How Do You Know If Plastic Bottle Making Machine Is Working Well?
19.What Are Some Common Faults The Can Affect The Production Rate Of Plastic Bottle Making Machine?
20.What Are Some Optional Devices That You Can Use With Plastic Bottle Making Machine?
21.Can You Supply Turn-Key Project Solution?
22.What Other Machines You Can Deliver Along With Plastic Bottle Making Machine?
23.Can You Provide After-Sale Technical Support Services For Plastic Bottle Making Machine?
24.What Is The Warranty Of Your Plastic Bottle Making Machine?

1.    What Is A Plastic Bottle Making Machine?

A Plastic Bottle Making Machine is a two-step Automatic machine that is used for blowing bottles.This machine can blow plastic bottles of different shapes, sizes, and capacities.

Generally, a PET material is used to form PET preforms.A Robot Arm is used for putting preforms into the machine for blowing plastic bottles.

A Plastic Bottle Making Machine uses advanced processes and technologies that are user-friendly and reliable.It is used in various industries like cosmetics, pharmaceuticals, and water bottles, etc.

2.    What Are The Features Of A Plastic Bottle Making Machine?

A Plastic Bottle Making Machine is an effective solution due to its following features:

  • It features a built-in Automatic microprocessor.
  • It is equipped with high-quality cylinders and valves.
  • A PLC system is an efficient and user-friendly feature of the machine.
  • Its highly reliable and genuine parts increase its lifespan.
  • The machine is having pressure control valves for speed controlling purposes of mold.
  • It uses a powerful hydraulic clamping system.
  • Easy to install, operate, test, and maintain.
  • Compact design
  • Constant voltage control system
  • HMI for easy operation
  • High-quality infrared pre-heater.

3.    What Are The Major Components Of A Plastic Bottle Making Machine?

The major components of a Plastic Bottle Making Machine are as follow:

  • Valves by SMC
  • Efficient PLC System by SIEMENS
  • Servo Motor & Actuator by SIEMENS
  • Heating Lamps
  • Cylinders by SMC
  • Hydraulic Clamping System by Servo
  • Other Electrical components by SIEMENS
  • World Famous Brand Parts World Famous Brand Parts

4.    How Does A Plastic Bottle Making Machine Works?

A Plastic Bottle Making Machine doesn’t need any expertise for its operation.To produce consistent quality bottles you need to read out all the instructions in the manufacturer manual.

The working of the Plastic Bottle Making Machine starts from loading the preforms into the infrared preheater.These preforms are then heated uniformly with variable speed track in the heating tunnel.After the completion of one trip, The preforms are again loaded into the preheater.

When heated properly, high-pressure compressed air is used to blow the softened preforms.When the bottle is produced, the Plastic Bottle Making Machine ejects it continues the process for further production. It can be sent directly to the filling machine or can be stored for later use.

5.    How Can You Take Advantage Of A Plastic Bottle Making Machine?

You can take the outstanding benefit of Plastic Bottle Making Machine by producing flawless plastic bottles with less than 0.1% rejection rate.

Another benefit of using this machine is that it is operated with a PLC system that is very easy to use.You can utilize it for your bottle production industry as it is capable of producing bottles in various sizes, ranges, and shapes.

Moreover, It does not require a special worker to feed the preform in the machine.It is a fully automatic two-step Plastic Bottle Making Machine.

6.    What Are The Famous Brand Parts Of 4 And 6 Cavity Plastic Bottle Making Machine?

The Famous brand parts of a 4 and 6 cavity Plastic Bottle Making Machine are as follow:

  • Displacement servo by SIEMENS
  • Preform feeding servo by SIEMENS
  • Stretch servo by SIEMENS
  • Action valves, oil-water separator, and cylinders by SMC
  • Stainless steel pathway for preform holder
  • Temperature adjustment and touch screen by SIEMENS
  • Hydraulic clamping system
  • A stainless steel feeding machine
  • SIEMENS electrical components
  • PLC by SIEMENS
  • High-pressure valve by MAC (for blowing)

7.    What Is The Capacity Range Of Plastic Bottle Making Machine?

The capacity range of a Plastic Bottle Making Machine is about 2000 to 10,000 plastic bottles per hour.

The bottle production capacity of the machine depends upon its mold cavities.The mold cavity number can be customized at your request.Generally it 2,4,6 8 and 10 cavities.

8.    What Is The Maximum Air Pressure Required For The Bottle Production In Plastic Bottle Making Machine?

The maximum air pressure required for blowing bottles in a Plastic Bottle Making Machine depends upon its capacity.

Generally, this capacity ranges from 2.0m3/minute to 10.0m3/minute. The maximum air pressure required is 3.0 Mpa.

9.    What Type Of Industries Require is A Plastic Bottle Making Machine?

All types of bottle products manufacturing industries should have a Plastic Bottle Making Machine.

Such as cosmetics industries, pharmaceutical industries, food and beverages, juices and drinks industries, liquid detergent bottle making, dairy products, etc.

Plastic Bottle Making Machine is a highly efficient and budget-friendly solution with an advanced PLC system installed in it.Its automatic preform feeding system makes it popular among different machines.

10.  How To Take Care Of Your Plastic Bottle Making Machine?

Proper care of your machine increases its lifespan drastically.You can take good care of your Plastic Bottle Making Machine by practicing following things on it.

  • Test before use
  • Check all the components working properly
  • Clean and lubricate all the moving parts
  • Install it in a proper suitable place
  • Note all the instructions mentioned in manual
  • Don’t practice random experiments on it
  • Store it properly after usage
  • Don’t throw any dirt in it
  • Adjust the temperature settings according to the requirements of your product
  • Keep it well maintained and keep its maintenance record
  • Replace damaged components

11.  What Are The Types Of Plastic You Can Use In Plastic Bottle Making Machine?

There are different types of plastic materials depending upon their density, flexibility, and strength, etc, that can be used in Plastic Bottle Making Machine:

  • HDPE (High-Density Polyethylene)
  • LDPE (Low-Density Polyethylene)
  • PP (PolyPropylene)
  • PVC (Polyvinyl Chloride)
  • PET (Polyethylene Terephthalate)

5 gallon bottle

12.  Can You Use Plastic Bottle Making Machine For The Production Of Other Plastic Products?

Yes, a Plastic Bottle Making Machine can be used to blow other plastic products.It uses PET as a raw material for the production of hollow objects.You can utilize it for producing plastic jars, plastic containers, automotive, etc.

13.  Is Your Plastic Bottle Making Machine Is Time Saving?

Yes! Of course, our Plastic Bottle Making Machine is a high-energy and time-saving solution for your applications.All of its high-quality components are made by famous brands.

These components work efficiently without wasting the time.As it is a fully automatic machine, it eliminates the time factor by feeding the preforms automatically.Moreover, a single operator can deal set of 3 to 4 Plastic Bottle Making Machines.

14.  What Is The Real Power Consumption Of A Plastic Bottle Making Machine?

The real power consumption of this machine is the value of actual power it consumed for useful work.This eliminates the reactive power of the machine.

The real power consumption of a Plastic Bottle Making Machine is 60% of its rated value from 10kw to 50kw.

15.  What To Consider While Choosing A Plastic Bottle Making Machine?

You need to keep the following point in consideration while choosing a Plastic Bottle Making Machine for your work site.

  • Examine the output and efficiency of the machine.
  • Check for its environmental stability.
  • Choose the one which is safe for your surrounding.
  • Go for the one with a good production rate and rejection rate less than 0.1 %.
  • Check the operational features, choose the one which is easy to operate.
  • Always select the one with proper protection devices.
  • Check the after-sales services, warranty, and delivery services of the manufacturer.
  • Finalize the Plastic Bottle Making Machineafter studying all its specifications and features according to your needs and requirements.

16.  Is The Production Rate Of Plastic Bottle Making Machine Is Higher Than That Of Semi-Automatic Plastic Bottle Making Machine?

Yes, the production rate of a Plastic Bottle Making Machine is higher than that of a Semi-Automatic Bottle Blowing Machine.As Plastic Bottle Making Machine is a fully automatic machine and highly time-saving.

It saves the energy and time to produce more products in less time.On the other hand, a semi-automatic machine of this type needs a worker to preform the feeding process.In this way, it takes more time in production and has a low production rate.

17.  What Are The Two Installation Options For Your Plastic Bottle Making Machine?

The methods of installing a Plastic Bottle Making Machine are:

  • Fixed Installation

In this type of installation, a Plastic Bottle Making Machine is fixed on your application for long time use.

You can fix it on the floor-based setup by using nuts and bolts.

  • Mobile Installation

In the mobile installation of the Plastic Bottle Making Machine, it is not permanently fixed on the floor.

It is very easy to install due to its compact design.

It can be placed on your working location on anti-vibration pads. You can move it any time for transporting.

18.  How Do You Know If Plastic Bottle Making Machine Is Working Well?

To ensure the proper working of your Plastic Bottle Making Machine, you need to consider the following points.

  • Observe if there is any irregular action is taking place?
  • Check all the moving parts are lubricated properly.
  • Also, check the engine reducer for oil.
  • Check the mold cavity and clean it for its optimum performance.
  • Check the quality of the bottled product, if there is any fault in the bottle identify the reason and resolve the issue.
  • Don’t forget the factor of voltage fluctuation, you can prevent it by turning on the heating machine first.
  • Check for the sealings.
  • Test your PLC system, touch sensor display, and other important components.

19.  What Are Some Common Faults The Can Affect The Production Rate Of Plastic Bottle Making Machine?

Some of the common issues that can affect the production rate of your Plastic Bottle Making Machine are pointed below.

  • Poor transparency of bottle products.
  • Off-set position of the bottled product.
  • Uneven thickness of bottle product.
  • Very thin bottom of the underprocessed bottle.
  • Improper clamping pressure.
  • Insufficient temperature.
  • Very high temperature.
  • Improper mold opening time.
  • Insufficient valve flow.
  • Misalignment of two manipulators.

10L full automatic blowing machine

20.  What Are Some Optional Devices That You Can Use With Plastic Bottle Making Machine?

Some auxiliary machines suggested with Plastic Bottle Making Machine include water chiller, air compressor, air cooler (dryer), etc.

21.  Can You Supply Turn-Key Project Solution?

Yes! We will be glad to supply a complete turn-key project solution to our valuable customers.

Which includes proper equipment and product design including water treatment, bottle labeling machine, washing/capping/filling machine, and film shrink packing equipment.

22.  What Other Machines You Can Deliver Along With Plastic Bottle Making Machine?

We can deliver an extrusion blow molding machine for the production of HDPE, LDPE, PP containers.

Moreover, we can supply PET preform mold, bottle cap mold, and PET preform injection machine.

23.  Can You Provide After-Sale Technical Support Services For Plastic Bottle Making Machine?

Of course, we are available 24/7 hours to entertain your queries.A proper video guide for the installation of Plastic Bottle Making Machine in the English language.

After two years of usage, we will be available to provide spare parts and replacements for faulty components of your machine.A complete instruction manual guide will be provided to you along with your Plastic Bottle Making Machine.

24.  What Is The Warranty Of Your Plastic Bottle Making Machine?

We provide a 5-year warranty for your Plastic Bottle Making Machine. During the first 5 years of your machine, if it shows any fault or any technical issue formed in it. We will be responsible to resolve the issue and replacing any broken parts with new ones.

You are welcome to contact us if have any question about Plastic Bottle Making Machine!

a.sl:hover,a.sl:active {background:red;}

Contact Our Support Team
Scroll to Top