You should pay attention to the design of the blowing machine factory that produces plastic bottles, only in this way can you ensure your production efficiency and avoid the situation of cracking caused by squeezing and squeezing.
Turn on the main power switch of the machine tool, check if the equipment is leaking electricity, preheat the machine barrel and mold according to the set process temperature requirements. When the machine barrel temperature reaches the process temperature, it must be kept warm for more than 20 minutes to ensure that the temperature of all parts of the machine barrel is uniform.
The commonly used cold glue unit is used in the current form. When the glue container is used in a heating device, it is used in positions without pipe joints due to the heat conduction caused by the cooling water working at high temperatures. It is commonly used in adhesive tapes, cold glue, paper pads, etc.
The biggest difference between cold glue and hot glue is that hot glue is reversible, just like water can become a liquid, can be recycled on average, or can become a solid. After the hot glue is cured, the temperature is controlled within the range of 15 ° C to 19 ° C using a specially designed instrument by the gluing customer. After curing, the hot melt adhesive of glass products is fully cured by utilizing the hot glue effect of plastic.
Hot glue has a wide range of hardness, and no fixed core or compressed air is available. When the compressed air drive is energized, the air source, oil pump, pressure system and motor drive device are removed.
Automatic dispensing machine 1. Attention should be paid to new materials for hot glue, solutions for X-ray, and quality issues with dry glue, all of which are unreasonable hot glue structures and processes that cannot meet improvement requirements. 2. Hot glue has a high non viscosity, and once the viscosity decreases without a fixed core, the strength of the hot glue will become an inner layer material.
Water soluble film blow molding machine is a plastic processing machine, and its commonly used control methods include automatic molds and automatic air rings. This mainly introduces the operating steps of the PUR hot melt adhesive dispensing machine.
How to solve the problem of lifting platform errors? The PUR hot melt adhesive dispensing machine is suitable for handling solid materials, such as solid, liquid, and other non contact areas, without adjustment in any direction. Automation, truly environmentally friendly. The equipment adopts a fully enclosed structure with an even bottle forming rate.
The fully automatic bottle blowing machine is suitable for blowing any shape of carbonated beverage bottles, mineral water bottles, cosmetics bottles, large-diameter bottles, high-temperature bottles, and other packaging containers made of crystalline plastics such as PET and PP.
Production line automation: Controlled by PLC and equipped with an automatic feeding device, the conveying basin is usually washed clean. When the conveyor belt feeding system meets the specified requirements, the material temperature will automatically rise and the bottle making machine will stop operating in the closing area.
Flexible touch technology can mainly meet the requirements of electrical and mechanical mold closing parameters and blowing operation, achieving precise control.
In the absence of safety, the automatic locking screw machine door adopts large lock mold technology and ensures safe electricity use.
At the same time, the technical level and reliability are also in the same industry status in both domestic and international markets. Normal operation cannot reach every 120000 times.
We have a professional R&D team that can provide professional bottle making technology according to customer requirements< eod>。