Top 10 most popular Blowing machine manufacturers in the world

● Use the established computer model to imitate blow molding mold, blanking blank, clamping plate, etc; The world’s top 10 most popular Blowing machine manufacturers.

● Industrial robots, 3-rack systems and transmission systems all adopt computer-aided design without raising the mechanical design height.

● If plastic parts and components such as sign language system, analysis, decision-making, grating, electroplating, vacuum cleaner are in place during operation, check whether the power supply voltage is too high, and whether the lubricating grease of machine equipment is faulty, and properly detect them.

● Before machine operation, check whether all parts are sensitive, loose or leaking. Before starting, ensure that all parts are safe and normal to avoid accidents; Check whether the voltage is normal. When it is lower than normal operation, there is no need to be an exception.

● Road design: When the machine breaks down, the treatment method is: please check whether the fasteners of the machine are damaged or loose, and check whether the connectors are in good condition.

● It is forbidden to maintain the empty machine without material or narrow the scope to avoid accidents; During continuous shutdown, please check whether the cooling water tank is open; During normal use, do not solve the problem by blocking.

● When the machine is running, pay close attention to whether there is abnormal noise in the machine, so as to find it early and stop it in time and solve it early.

● In case of emergency, press the emergency stop button to brake. Then analyze the causes according to the site conditions, find out the problems and solve them quickly.

● After the machine is in normal operation, do not put any part of your body into the machine to prevent the manipulator from hurting people. If the machine has abnormal noise, slow down and observe it.

● After the normal production of the machine, the operator must always observe the quality of the bottle to avoid voltage fluctuation or other reasons affecting the quality of bottle blowing.

● During machine maintenance, press the screen fault maintenance button to ensure safe maintenance. If you need to manually observe the action of each individual mold cavity, please pay attention to the position of the manipulator. At the same time, be sure to understand the function of individual buttons, and then move. Make sure that misoperation causes unnecessary trouble.

First of all, the skills and advantages of hot/cold cycle blow mold injection molding can greatly improve the appearance and texture of injection molding parts. The outstanding role is to select the parts processed with amorphous resin, including: PC resin, PC/ABS mixture, PBT mixture. When the surface temperature of the blow molding mold is higher than the Tg of an amorphous resin, during this period, the resin melt will not form a layer of skin, and the melt can move freely. The result is that the melt will not freeze when it touches the surface of the blow molding mold, which is different from the traditional injection molding skills. During mold filling, a thin layer of polymer melt escapes and remains on the outer surface of the pad template, which increases the glossiness of the parts and reduces the surface roughness. The research results show that if the glossiness of the parts is improved by 50%~90%, the surface roughness index – Rmax can be improved by 70% in terms of glass fiber reinforced materials, which is also related to the defect estimation of the special-shaped blow molding mold.

The third point: plastic products are made by one-time blow molding of mold embryo. There is no waste at the bottle mouth and bottom. The bottle mouth is flat and has good sealing performance.

blow machine plastic

The fourth point: the product produced by injection and blowing has beautiful appearance, accurate size of bottle mouth, and stable weight of plastic bottle.

The overall performance can be judged from the above points. If you need to know more about us, you can contact our Blowing machine manufacturer. We will have some technicians for guidance.

Risk warning: This website is only used as a platform for users to find trading partners, negotiate the transaction of goods and services, and obtain various trade-related service information. In order to avoid the purchase risk, it is recommended that you make sure before purchasing relevant products.

For dishonest behaviors, please immediately contact the product network. If it is verified, the product network will cancel the store of the enterprise, but the product network will not be responsible for the losses caused by you!

Automatic Pet Blowing Machine

Scroll to Top