It has a high-quality technical development team and rich experience in the production and manufacturing of Blowing machines. We can provide you with an ideal complete solution. The supplier of HONGZHEN Extrusion blowing machine with the best reputation.
Strict quality control and manufacturing spirit of excellence. We pursue excellent quality, and we firmly believe in reasonable price.
There are many products in the chain, and understanding will also affect the quality of various products. If the quality problem is delayed, it is likely to lead to order time.
So the most important thing when we customize our products is the price. As long as the products are cheap, they will provide good service.
Blowing machine, also known as plastic bottle blowing machine, is a machine used to blow plastic products. According to different materials, the Blowing machine can make a variety of different plastics.
Thermoplastic bubble envelope bags can be used regardless of material. Thermoplastic bags are the main production equipment for conventional plastic bags and belong to the packaging industry. Thermoplastic bags are also the joint efforts of various plastic packaging industries. Today, let’s talk about the structural advantages of the bubble envelope bag and its machine performance.
The advantage of the bubble envelope bag is that it will not endure grinding at any time. At this time, we should be the key inside the round plastic envelope bag.
In order to prevent the thermoforming plastic bags from going up the rice, we need to prepare a spare one. If there is a problem, we can find environment-friendly thermoplastic packaging bags and configure the main motor for converting old materials into thermoplastic bags.
The bubble film machine should always check whether the power supply, air pressure and cooling water are normal, and check whether the stainless steel current, cooling water and current of each part are normal at any time. Under these circumstances, we should do a good job of prevention. Therefore, we should observe and learn every day like some new people.
● Before stopping the machine, first turn the power switch of the extruder to the outside of the electric box, then start the machine and rotate the worm foot. If the SUSL is low when turning, you need to turn the knob into the motor to ensure the stability of “all parts of the equipment”. Here, we hope the machine can run normally to avoid failure.
● During operation, we need to pay close attention to the current of the main machine and adjust it on the road. Only after reaching the required value can we resume production.
● When the motor or other motors are running, the stability of the electric quantity of the drive motor should be related to the total circuit, and each operation should be evaluated.
● With the servo motor driver, we don’t have to worry about the noise of accelerating and stalling when running, which is also our confidence. During operation, we should also pay attention to the wear and alarm at the end of the reducer at any time.
● When the current of the machine is stable to the set speed, it is necessary to check whether the operating current is normal. If the cell analyzer is normal when there is a problem, it is necessary to replace it in time.
● Check whether the temperature control is normal and whether the temperature is above the set value and reaches the set value, so as to ensure the normal operation of the machine.
● Regularly check the temperature rise and mechanical transmission of each running motor, and check whether each component is normal. If the formwork is loose, repair it in time.
● Observe the different conditions of the machine, and tighten the power supply of the machine at any time to prevent starting due to high temperature inside the electric box.
● Whether there is an emergency stop button in the hand flow passage. If the speed is too slow, the task cannot be carried out in a second for users in the plant.
Company Profile Our company commitment: “First class quality, first class quality. Second place cooperation, lifelong intensive care.” concept policy, we will continue to provide you with complete and professional services.
Company Profile Our company promises: “First class quality starts with design.” We also adhere to the concept of “credibility first, quality first”.
Adhere to the belief and strive for long-term development. We look forward to working with you to create a better future!
We are a manufacturer specializing in the development and manufacture of plastic bottle blowing machines. The common plastic bottle blowing machines are used for recycling waste plastics, and can also recycle cm machines.
The company is engaged in the production and processing of Pet pipe bottom protection sealing strip, which is characterized by high degree of automation, convenient operation, good safety performance, high production efficiency and convenient maintenance.