The company that produces plastic containers with the best technology has years of experience in bottle blowing process design. It can provide plastic container designs that are suitable for customers based on their actual requirements, which can also meet their special needs. This bottle blowing machine can cooperate with customers and effectively achieve cooperation, which can also receive unanimous praise from customers.
With two main processes, forming one heat transfer, multiple process cycle times, and then hot filling, this can also effectively ensure the flowability of residual wall production.
Adjustment of the distance between welding line and cutting line: The distance between welding line and cutting line is generally 5-10mm. Rotate the handwheel on the adjustment frame to raise or lower the beam roller by a certain distance to obtain the ideal cutting line. In order to facilitate the observation of the quality of the welding line, the position of the single bottom line welding line can be adjusted to the outer end of the machine cutter. If the welding line and bottom line are not parallel, they can be loosened and tightened.
● Height positioning of welding line: The height of welding line and cutting line, as well as the position of the weld seam, should be horizontal, and the welding amount should be clear.
● Height positioning of welding line: The height and weld position of welding line and cutting line should be horizontal, and the position of welding line and cutting line should be horizontal, and consistent with the bottom line and shaft opening of the welding line.
● Height positioning of welding lines: The height, angle, and slope height of welding lines and cutting lines can be accurately adjusted. The end of the welding wire should be perpendicular to the plane or axis, moving parallel to the end and perpendicular to the inclined plane in the same plane. Pull out the welding machine driven by an electric motor to achieve welding.
The end face or slow pressing device of the welding wire moves smoothly: the welding wire and the inclined slide rail are locked simultaneously, installed well with the plug wire, and galvanized.
Ordering of welding wire end face insertion seat: The end face or rotation of the welding wire is transported downwards, and according to the testing requirements, the welding wire position of the roller welding machine, the connection position of the water diversion channel and the gate bearing, the bottom cutting position of the water pipe, the welding knife positioning hole, and the welding clamp are operated according to the requirements of the cutter head. The end face of the welding wire should extend diagonally and cannot change synchronously.
● Cooperative movement of welding wire and side welding chain: The welding wire and side welding chain are the same, and the retail raw materials of each section must be strictly recognized. The end face distance of the welding line rebounds greater than that of the side welding chain.
Cooperation between welding line and side welding chain: The distance between the chain of the wire drawing machine and the weld seam is driven by an electric motor, conveyed by the axial thrust of the welding knife on the mold head (or bearing), and composed of another device.
Cooperation between welding line and side welding chain: Based on the originally proposed drawing principle, each section of the work task is completed using a hydraulic device. When the welding line is working, the plate moves axially and the side welding is working.
Cooperation between welding wire and side welding chain: used for welding steel wire rings, aluminum sheets, aluminum films, plastic flat pulling blades, while setting the transmission knob on the motor and motor spindle.