The latest production technology for plastic bottle blowing machines is coming soon, and it is necessary to ensure that the machine does not malfunction. Generally, the bottle blowing machine has been started in the following situations.
Common faults and troubleshooting methods of bottle blowing machines Analysis of the causes of faults? Regarding the cause of the malfunction, specifically,
Our understanding of this knowledge will also be helpful for us in terms of machine performance and bottle blowing process in the future. First of all, we need to help ourselves. First, we need to understand our own problems. We can find the cause of the problem in time. Then we need to find the cause of the problem. Finding the cause of the problem can also help us to adjust in the future.
The 600ml stretch blow molding machine has a dual axis frame structure, and the indoor plane and mold can be easily adjusted. Here, we mainly introduce four aspects of analyzing the corresponding reasons, such as the distance from the outlet, the wear of the screw and the head, and the equipment model and distance matching. Of course, the most important thing is to ensure the reliability of the equipment.
When opening the high and low pressure air source switch, it is necessary to act slowly to prevent dirt from blowing into the solenoid valve due to the fast flow rate of the air source. At the same time, open the exhaust valve for 3 seconds to ensure that the air is clean.
When blowing the air pressure, the action should be fast and the air pressure should be uniform. Low pressure gas will not enter the trachea, and the mouth mold and exhaust pipe are stuck in the trachea.
Regularly check whether the temperature control is in good condition and whether the heating appliances are in good condition. If there are any abnormalities, they should be handled promptly.
● Check whether the triple component operates normally and whether the voltage is normal. Is the position of the connecting screw reducer offset.
When opening the cylinder, exhaust the air. The high-pressure air of the main engine cannot be completely discharged to avoid abnormal noise from the motor.
The outer diameter of the billet gradually increases, and it is not allowed for operators to manually adjust the belt station to avoid restarting.
When the billet is transported to the set position, if the friction rate is used to represent the power, the opening and closing speed of the billet axial brake will be increased. For personnel specifically responsible for exhaust, you should take out the slowly discharging bottle and observe the size of the accessories as soon as possible. If the deceleration characteristics meet the mechanical characteristics, and then move the billet axially, a difference in mechanical speed will be formed for individual finished products.
The Runda pipeline undergoes changes due to water induced, free time, and faults. Equipment failures must occur at the broken edge or edge of the wiring segment. After connecting this machine to the maintenance personnel, it is necessary to first make the wiring segment edges and then dismantle the accessories. When maintenance personnel are working, they must ensure that the lubricating oil is intact and the black lithium battery is further output, without the need for regular refueling or contamination.