The best reputable blowing machine factory for producing cosmetics bottles

The flange and bottle embryo conveying mechanism transport the bottle embryo into the annealing furnace according to the conveyor belt, eliminating the need for bottles to be produced by the bottle embryo.

c. Perform bottle conversion, allowing the bottle embryo to move forward according to the set trajectory, and maintaining the same distance between the packaging embryo and the fully cleaned bottle embryo.

d. Perform bottle “replacement” and have the bottle embryo repeat the action according to the set program to eliminate the bottle caused by the bottle embryo shooting out of the bottle.

f. The daily average production is 16pc, with a net weight of 70g. It can be used for the production of general soft cosmetics with high softness and hardness, and can also be exported to a dual liquid dispensing machine.

Electronic instrument model: 125×1 × twenty-four × 1200, can provide the function of a complete production line.

Material Package Convenience Certificate: Our company produces finished products with uniform wall thickness, which solves the problem of large bottle shapes that cannot be stacked. Can increase the number of product stacking layers.

The size of food packaging bottles determines the precise production capacity. When providing packaging bottle preforms with a volume ranging from 30ml to 200ml, their capacity exceeds that of similar products.

Electronic instrument model: 125×1 × twenty-four × 1200, fixed value (300ML)/ML/lower than similar products, can be estimated based on the predetermined time.

Because if the storage time of the preform (embryo) is too long, it may reduce the transportation time, and it is not healthy for the quality of the packaging bottle, and it is also meaningless for the packaging bottle.

Before starting each shift, lubricating oil must be added to each moving component once. (Manipulator, manipulator guide rail, mold opening and closing guide rail.).

The swing arm can be added once every 3-4 days. The large chain and small chain of the heating machine can be used once a month. Regularly check if the main engine reducer and heater reducer are lacking in oil. The host bearing can be added once every 3 months.

Before production, check whether all moving parts are firm, whether screws are loose or detached, especially in areas with strong impact force, and whether the belt transmission part is abnormal.

Bottle Manufacturing Machine

Check whether the emergency stop switches, safety door switches, and protective device detection switches are normal.

Check if the heating head is working properly when entering the embryo and when the embryo is dropped. If the insertion of the embryo is not in place, the nut of the embryo pressing device can be adjusted.

When the electromagnetic valve of the fully automatic bottle blowing machine encounters abnormalities, it should be cleaned in a timely manner (every 3.5 million bottles blown).

Risk reminder: This website is only used as a platform for users to search for trading partners, negotiate goods and services transactions, and obtain various trade-related service information. To avoid purchasing risks, it is recommended that you make sure before purchasing related products.

If you engage in dishonest behavior, please contact Product Network immediately. If it is verified, Product Network will cancel the company’s store, but Product Network will not be responsible for any losses caused to you as a result< eod>。

Scroll to Top