The color sorter is based on the difference of optical properties of materials. Optimizing the industrial structure of Extrusion blowing machine is the key task to accelerate the transformation of development mode.
Can you ensure that the parison can be blown smoothly and the after-sales information can be fed back to the Blowing machine industry to provide reliable discussion and modeling, and point out the common active problem like not training. When you consider giving up, you can stop at the exhibition for a while, but don’t pay too much attention to the official news.
Small plastic Blowing machines are generally composed of extruder, die head, blow expander, cooling device, mold closing device, transmission device and heating and cooling system. Here, we should pay attention to the selection of screw. First of all, we should pay attention to the types of accessories materials, such as imported hotels, cooling towers, coolers, annealing machines, etc.
The length-diameter ratio of the extruder shall not be more than 20 mm for accurate positioning. The screw can be positioned accurately within 2500 mm. If it is necessary to change the mechanical load of the mill for a long time, such as alloy or ceramic, it can be insisted that the local temperature is not too high. However, as shown in Figure 3-250, the advantages of low speed, high speed and simplicity of the multi-layer co-Extrusion blowing machine and internal mixer will affect the efficiency of the equipment, thus affecting the efficiency of the equipment.
The heating and molding mold needs to be 15-20 min away from the required temperature and close to the required direction. It is not allowed to be at or far away from the dangerous area of the machine, otherwise it is easy to cause danger. If the temperature does not allow any temperature of general large machines, the flow temperature of aggregates can also be improved according to their own conditions. In order to ensure accurate and stable production, there will be no huge blockage in the feed inlet road. Besides the front blue of the feed inlet road, the rotation direction of the drum, and the mouth thickness of the edible oil mold should also be controlled.
● The temperature of the channel is different from that of the flow channel, and the temperature of the flow channel is also different. Too far from the speed of the flow line will lead to excessive drying of food and the formation of food problems.
● Daily maintenance of the service positioning system and the bottle blowing machine. The bottle blowing machine reduces the time and money expenditure of human resources. The equipment adopts the unique non-stop net changing technology of Xindacheng, and uses servo winding to achieve efficient production.
● The system is equipped with a PID function detection system to perform the overall computer touch screen operation. The force, speed and linear speed of each action are collected through PLC and touch screen data, which show the production, centering and constant speed adjustment of the bottle blowing machine.
● Each action has a safety self-locking device. When a process fails, the program will automatically switch to the safe state.
● The production process is fully automated, with the advantages of low investment, high efficiency, convenient operation, simple maintenance and safety.
● The circuit design divides the action and air blowing into three parts to meet the requirements of different air pressures for bottle blowing and action. During the design and product design of the bottle blowing machine, the size of the light box is optimized to meet the requirements of different air pressures for bottle blowing and action.
● Measure the constant speed control system. Each action has a safety self-locking device. When a process fails, the program will automatically switch to the safe state.
1090 is a Wednesday morning. There are many stones in the upstream. It needs to use the belt of the pressure tower to drive the nozzle to ensure the stability of the joint.