You must not know the working principle of zipper extruder/zipper machine! Here is a brief introduction. The powder enters the zipper machine through the lower hopper and extrudes the new progress in the field of Blowing machine. First of all, the qualification of concrete products will be required. Then, the chemical fiber hopper flows through the barrel of the extruder for opening the ring and exhaust. This process is to operate the hot melt glue machine to vertically and longitudinally flow the raw material from the mold mouth to the edge, from the robot.
The progress of science and technology has improved the production of enterprises and helped consumers to control the quality of products. We continue to try new products, new technologies continue to upgrade, new speed regulation, make the system more stable operation, but also let many of our products use perfect.
Extruder barrel, screw diameter 38-100mm, length 16-120mm; When the barrel is heated, the screw diameter is 90-120mm. In order to better serve the society, we have used a good extruder to make the screw of the extruder thinner and thicker and easier to operate, so we can produce 35~95mm polymer compounds. The configuration of the extruder generally includes two parts: the main machine, but as shown in Figure 3-65, the screw diameter is 38-100mm. In contrast, the space is very large in terms of setting, so it is easier to install. When the power of the machine finally appears, the power consumption of the whole machine is also within the range of ± 1%.
Company Profile We provide customers with professional screw, barrel, double-alloy screw, material pipe, air pipe and film blowing machine.
The energy saving of the extruder can be divided into two parts: the power part and the heating part.
Energy saving of heating part: the energy saving of heating part is mostly by using electromagnetic heater, and the energy saving rate is about 30% – 70% of the old resistance coil.
● Specific resistance heating, the electromagnetic heater directly acts on the material pipe heating, reducing the heat loss of heat transfer.
● Compared with resistance heating, the heating speed of electromagnetic heater is more than one quarter faster, reducing the heating time.
● Compared with resistance heating, the heating speed of electromagnetic heater is faster, the production efficiency is improved, the motor is in saturation state, and the electric energy loss caused by high power and low demand is reduced.
The above four points are the reasons why Feiru electromagnetic heater can save up to 30% – 70% energy on the film blowing machine.