The control accuracy of the condition range of the bottle blowing unit is as follows: PET bottle blowing machine has the following capabilities, supporting the smooth and reliable reciprocating operation of HDPE bottle blowing machine.
Different heating heads have different temperature requirements. For example, the melt temperature is used to heat the heater of the bottle body, and can also be controlled by observing the temperature of the entire transmission core.
The speed distributor for the operation of the bottle blowing machine must depend on the set value of the operating speed when the winding is running to ensure fast operation.
The temperature of the heating ring of the plastic bottle blowing machine should be well controlled, and the wider the measurement range, the faster the heating speed, which is crucial for speed. For example, in the long run, the temperature of the electric heater will remain constant, but it will be lower for open containers.
The heating control of the solenoid valve is an electromagnetic induction coil controlled by a signal. The adjustment plug in the controller cuts off the power supply, and the water pump automatically matches the nearby power line. When the heating phase is moving in the opposite direction, the motor sends the electro-hydraulic phase installation to the solenoid valve, and the current from the wave chamber sends the electro-hydraulic phase installation to the solenoid valve. The control valve stops working, and when the solenoid valve is energized, the heating control valve starts heating, thereby achieving the effect of voltage. The heating control valve stops working, allowing the electrical energy at the front of the material barrel to pass through the air pressure of the encoder again, sending the electro-hydraulic phase installation to the solenoid valve, and cutting off the power switch.
● Energy saving supports the corresponding electromagnetic induction principle. The release adopts terminals with low friction coefficient, which is convenient for operation and use. The release uses an oil pressure buffer. When the solenoid valve stops working, the coil is charged and the wire is connected. The component automatically closes, and then the annealing wire is selected.
Energy saving supports direct current displacement, especially the technical characteristics of the interchangeable light box engineering, making Hengtuo’s thermal sensitivity and liquid level the same. From coal burning to softening rate modification, it can save about 30% energy per hour.
Reasonable distributors, such as electric control cabinets, are easy to collect and turn on lights, saving energy consumption, and the grounding wire design of the box is convenient for outdoor use.
The production process is fully automated, with advantages such as low investment, high efficiency, easy operation, simple maintenance, and safety.
At the gas load point, due to changes in the volume of the box, its stability is lower than its stability (of course, the price is lower than the procurement cost), which will decrease by 10%
The company mainly sells beverage machinery products such as filling machines, beverage filling machines, blow filling and sealing all-in-one machines, blow bottle machines, rotary blow bottle machines, etc.
Jinrong Machinery’s leading products include a three in one bottle filling and capping unit, a two in one filling and capping unit, a two in one filling and sealing unit, a fully automatic bottle blowing machine, a gallon barrel series unit, a water treatment production line, an automatic on-site cleaning system, various complete sets of sterilization equipment, a bottle filling and capping production line, a complete set of equipment for fruit juice and tea beverages, etc.