How to Reasonably Choose a Bottle Blowing Machine Factory for Producing Plastic Containers

How to Reasonably Choose a Blowing Machine for Producing Plastic Containers? The manufacturer of the blow molding machine will tell you the basic principles of the blow molding machine.

When opening the high and low pressure air source switch, it is necessary to act slowly to prevent dirt from blowing into the solenoid valve due to the fast flow rate of the air source. At the same time, open the exhaust valve for 30 seconds to ensure that the air is clean.

When starting the machine, it must be ensured that the mechanical parts are in good condition and there are no people inside the machine. Especially the position of the crank to avoid injury. Simultaneously close the safety door. 14. When starting the machine, the motor must be started first, and the heating machine must be started with a delay of 30 seconds to prevent voltage fluctuations.

Stretch Blow Moulding

One step “injection blow” refers to the completion of blow molding on the same machine. According to different models, it is usually divided into three stations and two stations for “injection blowing”.

The two workstations of the two station “injection blow” bottle making machine can be placed up and down or front and back, with the top workstation being the forming workstation and the second workstation being the blow molding molding workstation. Because there is a shortage of one bottle removal and cooling station.

To complete fully active counting packaging (usually manual counting in bulk). Compared to the three station bottle making machine, its production power is lower and its production cycle is longer.

The workstation can operate together, not only greatly improving the production power, but also connecting with the conveyor belt, actively counting and packaging, truly completing the entire process of producing plastic bottles for medicine, and ensuring the cleanliness of the product.

plastic blow molding machine

Due to differences in raw materials, processing requirements, yield, and cost, different blow molding methods have different advantages in processing different products.

Fully automatic blow molding machine stretching blow molding: includes two methods: extrusion stretching blow molding and stretching blow molding, which can process biaxial oriented products, greatly reducing production costs and improving product performance.

Risk reminder: This website is only used as a platform for users to search for trading partners, negotiate goods and services transactions, and obtain various trade-related service information. To avoid purchasing risks, it is recommended that you make sure before purchasing related products.

If you engage in dishonest behavior, please contact Product Network immediately. If it is verified, Product Network will cancel the company’s store, but Product Network will not be responsible for any losses caused to you as a result< eod>。

Scroll to Top