How to reasonably select a manufacturer of blow molding machines for producing fruit juice beverage bottles? What you want to know is how to set the air pipes and valves. Interested friends, let’s take a look!
Usually, based on the comparison of the following aspects, it is relatively easy to understand here. Let’s briefly introduce how to solve different bottle blowing machine equipment!
The reason why the high-pressure solenoid valve cannot be effectively closed and causes high-pressure gas leakage is that there are foreign objects stuck at the sealing ring inside the high-pressure solenoid valve, most of which are plastic fragments.
● Upper and lower limit alarm for stretching sealing. The reason is that the low-pressure air pressure is insufficient, the two position five way solenoid valve is not sensitive, and the relay is damaged.
If the machine moves again in the factory without a crane, it is necessary to place rolling wood at the bottom of the machine. A. Spring pliers for automatic up and down barrel gas. B. The thick plate has strong mold adjustment force, and can be additionally clamped with the hydraulic push rod at the flat core for mold closing. The blank moves through the air inlet, which is broken due to the resistance of the pressure plate’s gravity. Generally, it is a postpartum buffer cylinder, which is suitable for inflatable leather.
Before production, each switch should be turned to the “off” position to confirm that the knob should maintain a certain pressure. At this point, each switch should be closed in one position while maintaining a certain pressure state to ensure normal operation.
The surface treatment agent used by our company adopts copper card type rotary knives. But thanks to the replacement of the exhaust groove with a galvanized plug, the punch is connected with a dustproof connection.
The surface is “strengthened”, and all points are tested at the factory without any cutting or leakage. Afterwards, there will be a bright light inspection machine every time, customized according to customer needs.
● Temperature settings for each stage of operation of the fully automatic blow molding machine, especially in environments with high humidity during equipment operation.
● The dynamic mold is different. The injection process is rotating and needs to be exchanged, so it must be identical. But there are also special cases where the cavity can be different during molding.
After the injection molding of the first injection channel of the mold is completed, it cannot be left on the mold before coming down to calibrate the thermocouple.
We often say that plastic products are very excellent, and the production standards for plastic products vary depending on the actual standards of each manufacturer. When we conduct production, most of us follow the principles of safety and standard operation.
The blow molding products of the mold factory mainly include plastic wire drawing machines, round wire drawing machines, large flat hair, and flat wire drawing machines. And after multiple stops, there will be other cans available, in order to avoid foreign objects from the feeding machine, so there is no need to worry about quality issues.
We are all familiar with PETG plastic wire drawing machines, and we must remember to ensure safety when using them. When walking in the foreign market, there will be no problems with motor parts, but what are its main advantages? Mainly manifested in the maintenance aspect. Today, I will give you a brief introduction.
