Plastic bottles are increasingly receiving attention from production enterprises in the market, and many bottle blowing machine manufacturers are striving to develop towards production. At the same time, environmental protection and energy-saving technology have also played a very important role in the mechanical aspect of bottle blowing machines.
Before starting each shift of the bottle blowing machine, lubricating oil must be added to each moving component once. (Manipulator, manipulator guide rail, mold opening and closing guide rail.).
The swing arm can be heated once every 3-4 days, and the large and small chains of the heating machine can be heated once a month. Regularly check if the main engine reducer and heater reducer are lacking in oil. The host bearing can be added once every 3 months.
Before production, check whether all moving parts are firm, whether screws are loose or detached, especially in areas with strong impact force, and whether the belt transmission part is abnormal.
Check if the heating head is working properly when entering the embryo and when the embryo is dropped. If the insertion of the embryo is not in place, the nut of the embryo pressing device can be adjusted.
When the electromagnetic valve of the fully automatic bottle blowing machine encounters abnormalities, it should be cleaned in a timely manner (every 3.5 million bottles blown).
When opening the high and low pressure air source switch, it is necessary to act slowly to prevent dirt from blowing into the solenoid valve due to the fast flow rate of the air source. At the same time, open the exhaust valve for 30 seconds to ensure that the air is clean.
When starting the bottle blowing machine, it must be ensured that the mechanical parts are in good condition and free of foreign objects. Especially in sports positions to avoid injury. Simultaneously close the safety door. 14. When starting the machine, the heating machine must be started first to prevent voltage fluctuations. Before starting the heating, make sure that the cooling water is turned on. 41. Warm up and start (2 meters), observe if the machine is running normally. 25. Warm up start (2 meters.
After heating and starting (2 meters) for minutes, wait for the oven temperature to rise evenly and then keep it warm within the range of 58% -50%. 8. It is necessary to maintain a constant temperature for at least 48 hours to prevent difficulties in movement.
● It is necessary to launch packaging containers with the required air pressure according to one’s own situation, such as heavy air storage tanks. Multi layer co extrusion (first step, using a food box) bottle blowing machine.
To reduce the self weight sagging of the billet, if conditions permit, by increasing. The sagging of the thin film reduces the space for the mold of the container due to the sagging of the container. This situation is caused by acceleration, acceleration, and heating.
Traditional plastic containers related to the manufacturing and research and development of blow molding molds, especially high-end plastics, have complex applications, large wall thickness variations, and low requirements for molds. Therefore, how to ensure the accuracy of blow molding molds and their dimensions depends on the reasonable design, high precision, and low cost of blow molding molds.
Since the development of injection molding in China, blow molding molds have always been very advanced. In recent years, there have been several reports of the use of industrial plastic products and the promotion of diversified paper products. The fierce competition in the product consumption market has made plastic products increasingly popular in terms of diversification and diversification.
Blow molding mold processing is one of the representatives second only to extrusion molding technology. Blow molding mold is not only a processing technology, but also a tool directly involved in plastic product processing.
Analysis of the Advantages and Disadvantages of Wall Thickness: The Correct Use of Plastic Molds for Injection Molding. What are the Factors Influencing TV Accessories in Blow Molding Mold Manufacturers.