How to make Blowing machine

The screw discharge of the Blowing machine is unstable, which is usually manifested as the screw discharge is too fast or too slow or the discharge length is different, but it is an unstable discharge problem. Generally, the speed of PE accumulation is constant, which can be controlled below the screw speed of the original molding machine.

The number of pneumatic systems of Blowing machines is very rich, which is usually satisfied by some media, such as pneumatic, hydraulic pump, pneumatic, electrical equipment, hydraulic valve, torque hydraulic cylinder, etc., as long as these parts have flow.

The number of pneumatic systems of Blowing machines is very large. Common full-automatic Blowing machines include hydraulic pumps, pressure blowers, bottle blowers, and rotary molding machines.

In production, we often choose most aspects that need special attention. In selection, we often need to pay special attention to not only productivity, but also production cycle.

It is often easy to understand these factors when producing Blowing machines, as long as these factors will affect the production of Blowing machines.

The requirements of different manufacturers on Blowing machines are very high. For the proper operation of Blowing machines, they often choose trays with many factors.

What you want to know should not be a false report, because the final performance of each manufacturer is different, so many manufacturers advocate blowing machines.

So what should we pay attention to when choosing a Blowing machine? The first element to understand is to understand and learn many parts related to Blowing machines.

The screw of the Blowing machine is an important part of the Blowing machine. Its function is to heat and melt the plastic particles and then blow them into the screw we want. There are many materials for the screw of the Blowing machine, and there are many varieties of flax. It can be used with many special metal products, but it is the same for common abrasive tools and wood.

When selecting Blowing machines, if you encounter some situations that you should pay attention to, do not choose lighters.

When we choose Blowing machine, if we can’t habitually choose to stand in the new part, it is easy to be welcomed.

The Blowing machine manufacturer tells you that the requirements for blow-molding products are very high, and higher talents need to be applied.

So when choosing the Blowing machine, if we don’t choose the right position, then you should choose the low price and high requirements.

According to the parison production method, blow molding can be divided into extrusion blow molding and injection blow molding. The newly developed ones are multi-layer blow molding and stretch blow molding.

Irradiate the preform (embryo) with an infrared high-temperature lamp to heat and soften the body (embryo) of the preform (embryo), the position of the blow molding mold (embryo), the position between the mold and the mold, and the position between the mold, etc.

Water Bottle Making Machine

How can modern people live without plastic bottles in their daily life, and how can there be bottles without a bottle blowing machine? Today, let’s learn about the three main functions of the bottle blowing machine. The extruding and blowing machine is the same as the extruding machine and the bottle blowing machine. It is mainly used for the production of extruded products, such as beverage bottles, cosmetics bottles, pharmaceuticals, food plastics, etc. The products are widely used for the sales of large consumer goods and non-carbonated beverages. The material selection of the extrusion bottle blowing machine is high quality because it has the following characteristics.

● No feeding at the feeding position: check several conditions: whether the hopper is out of material; if yes: it is necessary to feed quickly; if not: please check whether the control contactor of the hoist is powered on; if it is, check whether the motor is powered on and loaded, because it is likely that the bottle preform (embryo) has blocked the lifting belt. At this time, it is simple to help lift manually. If the control contactor of the hoist is not powered on, check whether the bottle embryo detection electric eye is not in the same line with the reflector.

plastic blow moulding machine

● The feeding tray is stuck when feeding: this is a headache. From experience, if the length of the preform (embryo) is longer and the cutting weight is larger, this phenomenon is relatively rare.

Please check your exhaust time setting. If the exhaust setting is normal and the failure occurs once the bottle is blown each time, it can be judged that it is the problem of the exhaust valve. Please open the exhaust valve and check the condition of its springs and seals (another phenomenon of this failure is that the exhaust sound is loud or there is a noise that cannot be discharged).

If you encounter the situation that many molds can not be opened occasionally due to normal production, please check whether the locking pin has a broken screw in it. In addition, please check whether the locking force is too large. If it is too large, it should be readjusted according to the standard.

[Frequently asked questions] Our company provides you with a 1L 4L dialysate barrel Blowing machine, which is specially designed to provide you with a 1L 4L dialysate barrel Blowing machine.

Scroll to Top