Large volume containers and products with complex shapes can be formed; Injection blow molding containers have high dimensional accuracy. How to find a wholesaler of Blowing machines.
● According to the consideration of the section size of the factory, the preformed blow molded products usually use 30-45 ° containers. 2. The air flow channel and exhaust blade (also known as the volume of the world) of the section should be considered to control multiple air pressures. Generally, the air inlet form of the control system is set. 3. The position of the exhaust valve shall be overlapped. The position of the pipe and the pipe system block shall be compared, but the position of the joint and the connected pipe system block shall be consistent. 4. The exhaust rod shall be free from leakage and unsafe, and the products shall be isolated. The exhaust rod shall be free from leakage. 5. The exhaust rod shall have potential safety hazards,
The preform (embryo) is irradiated by an infrared high-temperature lamp, and the preform (embryo) part of the preform (embryo) is heated and softened. In order to maintain the shape of the bottle mouth, the preform (embryo) mouth does not need to be heated, so a certain cooling device is required to cool it.
● Before starting each shift, lubricating oil must be added to each moving part once. (Manipulator, manipulator guide rail, mold opening and closing guide rail.
● The swing arm can be added once every (3-4) days. The large chain and small chain of the heater can be used once a month. Frequently check whether the main engine reducer and the heater reducer are short of oil. The main bearing can be added once every three months.
● Before production, check whether the moving parts are firm, whether the screws are loose and fall off, especially in places with strong impact force, and whether the belt drive part is abnormal.
● Check whether the embryo feeding and embryo dropping parts of the heating head work normally. If the insert is not in place, the nut of the press device can be adjusted.
● When the solenoid valve of the automatic bottle blowing machine is abnormal, it should be cleaned in time (once every 3.5 million bottles).
Risk warning: This website is only used as a platform for users to find trading partners, negotiate the transaction of goods and services, and obtain various trade-related service information. In order to avoid the purchase risk, it is recommended that you make sure before purchasing relevant products.
For dishonest behaviors, please immediately contact the product network. If it is verified, the product network will cancel the store of the enterprise, but the product network will not be responsible for the losses caused by you!