How to Choose a Good Blowing Machine for Producing Cosmetic Bottles? Precautions for Factory Operation: Blowing Machine Machine Classification: Blowing Machine Series.
Main products: cosmetic bottles, white water bottles, cosmetic bottles, disinfectant bottles, detergent bottle blowing equipment, disinfectant bottle blowing machines, etc.
Cosmetic plastic bottles refer to green plastic bottles made from PET, PP, PE, PP as raw materials, additives, or lined with (PET) thermoplastic resins or solvents.
Reason: 1. The heating temperature is too high. 2. The heating time is too long. 3. The compressed air contains water. 4. The injection molding embryo tube itself is not transparent. 5. The embryo tube design is not suitable. 6. The blowing ratio is too small.
Exclusion methods: 1. Reduce temperature 2. Shorten heating time 3. Use a dryer to remove water 4. Improve the quality of the embryo tube, select materials and increase the dryness of raw materials 5. Improve the size design of the embryo tube 6. Reduce the diameter of the embryo tube.
Reason: 1. The heating temperature is too low. 2. The wall thickness of the embryo tube is uneven. 3. The thickness of the embryo tube is too thick, and the heating penetration is insufficient.
Troubleshooting: 1. Heat up or slow down the revolution speed. 2. Improve the quality of the embryo tube. 3. Reduce the thickness of the embryo tube, or try raising the outer cover of the heating device to increase the surface temperature emission of the embryo tube.
Troubleshooting: 1. Delay the blowing time or increase the lowering speed of the stretching rod. 2. Adjust the position of the magnetic pole switch. 3. Adjust the position of the stretching rod. 4. Improve the quality of the embryo tube. 5. Improve the heating conditions, or check if there are any problems with the embryo tube rotation.
Troubleshooting: 1. Adjust the position of the stretching rod 2. Adjust the position and aperture of the blowing hole 3. Increase the stretching ratio or blowing ratio 4. Check the rotation device 5. Improve the quality of the embryo tube.
Double toggle mechanism pressure: Adjust or replace the connecting rod cylinder 4. Check the rotation device 5. Improve control accuracy.
SDR RB830-08/02 has a blowing pressure of 02-04MPa and a blowing pressure of 02-05MPa.
Tonnage packaging: 20-100 tons, tonnage switch accuracy is 05-10uHHRC, and the maximum processing amount is KG.
1200-1500 tons. Generally, packaging companies have liquid silicone injection machines, which also have two silicone pads to ensure quality production. They can also be equipped with structural designs such as shock absorbers, rubber joints, and shock absorbers according to customer requirements.
From a 100ml small bottle to a 5-gallon filling machine, with a large capacity for bottled sauce, seasoning, stacking space, packaging tools, etc., the annual production capacity is over 2000 units.
Packaging Machinery: Project Introduction: A set of World Cup dedicated glue breaking machine, driven by a servo system, high-precision sol, equipped with domestic.