How to choose a good bottle blowing machine for producing mineral water bottles The company chooses a bottle blowing machine for mineral water bottles Today, for people who use bottle blowing machines, you can use perfume to meet all the requirements for the plastic bottle industry. For the maintenance and upkeep of the bottle blowing machine, the operator must pay attention to the maintenance. The top 10 levels of the iron imm bottle blowing machine must be operated according to the customer’s requirements.
The electrical control part of the bottle blowing machine is a key component that facilitates future maintenance. Electrical maintenance and component maintenance are appropriate, and attention is paid to protection to avoid damage to the bottle blowing machine, especially in terms of quality. If there are problems, the maintenance components of the bottle blowing machine will become more expensive.
Before starting each shift, there is a mold monitor. If each replacement product is different and the frequency converter display setting is damaged, then we should also remember to contact the other party after replacing the product
Before starting each shift, lubricating oil must be added to each moving component once. (Manipulator, manipulator guide rail, mold opening and closing guide rail.).
The swing arm can be added once every 3-4 days. The large and small chains of the heating machine can be used once a month. Regularly check if the main engine reducer and heater reducer are lacking in oil. The main bearing can be added once every 2-3 months.
Before production, check whether all moving parts are firm, whether screws are loose or detached, especially in areas with strong impact force, and whether the belt transmission part is abnormal.
Check if the heating head is working properly when entering the embryo and when the embryo is dropped. If the insertion of the embryo is not in place, the nut of the embryo pressing device can be adjusted.
When the solenoid valve of the bottle blowing machine encounters abnormalities, it should be cleaned in a timely manner (every 3.5 million bottles).
When opening the high and low pressure air source switch, it is necessary to act slowly to prevent dirt from blowing into the solenoid valve due to the fast flow rate of the air source. At the same time, open the exhaust valve for 30 seconds to ensure that the air is clean.
Browse more about the split mouth blowing machine, semi-automatic blowing machine, five gallon blowing machine, and other related content.
Haven’t you found the product you want yet? Immediately publish procurement information and let suppliers proactively contact you!
You can also enter the “Consumer Fraud Prevention Guide” to learn about the complaint and handling process. We will wholeheartedly serve you. Thank you for your attention and support to Mechatronics Home Network< eod>。