How to choose a blowing machine company that produces fruit juice beverage bottles? What are the characteristics of the company? The maturity of microcomputer control has high requirements for the performance of machines, and it also requires high maintenance and rust prevention treatment. Therefore, the working conditions are suitable for people with short exhaust time and low accuracy requirements.
The beverage production line is used in the field of filling carbonated beverages. The beverage production line is used for packaging, and the filling machinery is the main body of liquid filling. The beverage production line is the basic coating used for packaging beverages, and the beverage production line uses PET as the main raw material.
At present, the honey edible oil of fruit juice drinks includes different beverage machinery such as detergents, packings, dyes, essence, liquids, etc. The honey edible oil in fruit juice drinks has a higher temperature and higher viscosity to honey.
Nowadays, the wear and tear problem of fully automatic beverage filling machines is mainly due to different varieties. What are the advantages of fully automatic beverage filling machines?
PET bottles are currently the most commonly used filling and packaging equipment on the domestic market. They are a type of non-woven fabric that requires broken bottles for beverages, mainly composed of PET particles.
Bottle is a filling machine used for beverages, which mainly uses resin as the raw material. Its characteristics were first understood, and then PET was used.
The container characteristics of beverage PET bottles are diverse solid-liquid, usually containing parts in rubber form, such as filling marks, packaging patterns, capacity, food packaging, and hygiene level.
Of course, when using amorphous glass bottled beverages, the first thing to consider is the container characteristics of the bottled beverage. Later, it is possible to use glass bottled beverages.
Bottle blowing machine, also known as blow molding machine; Mainly engaged in the production of plastic bottle blowing molds, most of which are glass products.
The plastic bottle blowing machine includes: fully automatic bottle blowing machine, manual bottle blowing machine, bottle body forming machine, closed furnace, automatic demolding, etc.
No: Please check if the control contactor of the elevator is in the powered on state. If it is, quickly check if the motor is in the powered on and loaded state, as this situation is likely caused by the bottle blank (embryo) jamming the lifting belt. The simple method is to manually assist in lifting. If the control contactor of the elevator is not in the powered state, please check if the bottle embryo detection eye is not in the same line as the reflector.
● Stuck feeding tray: This situation is a headache. From experience, if the length of the bottle preform (embryo) is longer and the cutting weight is larger, then this phenomenon is relatively rare.
Please check your exhaust time setting. If the exhaust setting is normal and malfunctions every time you blow the bottle, it can be determined that there is a problem with the exhaust valve. Please open the exhaust valve and check the condition of its springs and seals (there is also a phenomenon of loud exhaust sound or unclean exhaust sound).
If you encounter a situation where many molds cannot be opened due to normal production, please check if there are screws with broken sections in the locking pin. Also, please check if the locking force is too strong. If it is too strong, it should be adjusted according to the standard.