Extrusion blowing machine industry faces consumer sentiment directly

Concept, the Blowing machine uses servo system and simple mechanical equipment to achieve the purpose of performing messy actions. Extrusion blowing machine industry directly faces consumer sentiment. According to different models, they are generally divided into slow Extrusion blowing machine, fast injection Blowing machine, foam stabilizer, mold adjustment machine, etc.

At present, all walks of life in the Blowing machine industry in the market are gradually starting to produce their own products, and the Blowing machine industry also often begins to focus on users’ involvement in the surface layer of unimpeded (cold end point), making its share in the market increase accordingly, stimulating the development of the Blowing machine manufacturing machinery industry.

Under the background of changes in the market demand layout and the macroeconomic environment, the Blowing machines produced by Kuaiyingv Login continue to innovate and enter a new stage of development to produce products more suitable for the market demand. Quickly win v and log in to Teyilang.

In order to meet the increasingly diversified needs of customers, Blowing machine manufacturers are willing to save effort and consider more when choosing.

Quick win v login professional provides Blowing machine equipment. Common control methods include automatic die head (thermal expansion screw control) and automatic air ring.

Quick win v login 1. Before starting each shift, lubricating oil must be added to each moving part once. (Manipulator, manipulator guide rail, mold opening and closing guide rail.

● The swing arm can be added once every (3-4) days. The large chain and small chain of the heater can be used once a month. Frequently check whether the main engine reducer and the heater reducer are short of oil. The main bearing can be added once every three months.

auto pet bottle blowing machine

● Before production, check whether the moving parts are firm, whether the screws are loose and fall off, especially in places with strong impact force, and whether the belt drive part is abnormal.

● Check whether the embryo feeding and embryo dropping parts of the heating head work normally. If the insert is not in place, the nut of the press device can be adjusted.

● When the solenoid valve of the bottle blowing machine is abnormal, it should be cleaned in time (once every 3.5 million bottles).

● When opening the high and low pressure air source switch, it must act slowly to prevent dirt from blowing into the solenoid valve when the air source flow rate is too fast. At the same time, open the exhaust valve for 30 seconds to ensure that the air is clean.

● When the normal air source is switched on, the action speed must be higher than 0~50% to avoid personal injury. At the same time, close the upper and lower valves.

● The action speed must be higher than 100~180 ° C, which is the pre-blowing part that the bottle blowing machine must pass through. For example, the speed starts slowly, everyone is here, the control time is not enough, the movement speed is too fast, and there is no jamming. After the bottle blowing machine is in normal operation, do not stretch any part of the body into the machine to prevent the mechanical hand from hurting people. For example, in case of emergency, quickly press the red emergency button to prevent accidents.

The company is mainly engaged in filling machine, beverage filling machine, blow filling and sealing machine, bottle blowing machine, rotary bottle blowing machine, and other beverage machinery products.

Jinrong Machinery’s leading products include bottle filling and capping three-in-one unit, filling and capping two-in-one unit, filling and capping two-in-one unit, full-automatic bottle blowing machine, gallon barrel series unit, water treatment production line, automatic on-site cleaning system, various sterilization complete equipment, bottle filling and capping production line, fruit juice and tea beverage complete equipment, etc.

Scroll to Top